| Name | Data Type | Qualifiers |
| Name | Data Type | Value | Scope | Flavors |
| CurrentCharSet | string |
| Description | string | Specifies the current character set being used for the output of text relating to management of the Printer. The character set described by this property should also be listed in CharsetsSupported. The string specified by this property should conform to the semantics and syntax specified by section 4.1.2 ("Charset parameter") in RFC 2046 (MIME Part 2) and contained in the IANA character-set registry. Examples include "utf-8", "us-ascii" and "iso-8859-1". | None | TRANSLATABLE= true |
| ModelCorrespondence | string | CIM_Printer.CharSetsSupported | None | None |
| CurrentLanguage | uint16 |
| Description | string | Indicates the current printer language being used. A language that is being used by the Printer should also be listed in LanguagesSupported. | None | TRANSLATABLE= true |
| ModelCorrespondence | string | CIM_Printer.LanguagesSupported, CIM_Printer.CurrentMimeType | None | None |
| ValueMap | string | 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47 | None | None |
| Values | string | Other, Unknown, PCL, HPGL, PJL, PS, PSPrinter, IPDS, PPDS, EscapeP, Epson, DDIF, Interpress, ISO6429, Line Data, MODCA, REGIS, SCS, SPDL, TEK4014, PDS, IGP, CodeV, DSCDSE, WPS, LN03, CCITT, QUIC, CPAP, DecPPL, Simple Text, NPAP, DOC, imPress, Pinwriter, NPDL, NEC201PL, Automatic, Pages, LIPS, TIFF, Diagnostic, CaPSL, EXCL, LCDS, XES, MIME | None | TRANSLATABLE= true |
| CurrentMimeType | string |
| Description | string | Specifies the mime type currently being used by the Printer if the CurrentLanguage is set to indicate a mime type is in use (value = 47). | None | TRANSLATABLE= true |
| ModelCorrespondence | string | CIM_Printer.CurrentLanguage | None | None |
| CurrentNaturalLanguage | string |
| Description | string | Identifies the current language being used by the Printer for management. The language listed in the CurrentNaturalLanguage property should also be listed in NaturalLanguagesSupported. | None | TRANSLATABLE= true |
| ModelCorrespondence | string | CIM_Printer.NaturalLanguagesSupported | None | None |
| CurrentPaperType | string |
| Description | string | Specifies the paper type that the Printer is currently using. The string should be expressed in the form specified by ISO/IEC 10175 Document Printing Application (DPA) which is also summarized in Appendix C of RFC 1759 (Printer MIB). | None | TRANSLATABLE= true |
| ModelCorrespondence | string | CIM_Printer.PaperTypesAvailable | None | None |
| DefaultCopies | uint32 |
| Description | string | The number of copies that will be produced for a single Job unless otherwise specified. | None | TRANSLATABLE= true |
| DefaultLanguage | uint16 |
| Description | string | Indicates the default printer language. A language that is used as a default by the Printer should also be listed in LanguagesSupported. | None | TRANSLATABLE= true |
| ModelCorrespondence | string | CIM_Printer.LanguagesSupported, CIM_Printer.DefaultMimeType | None | None |
| ValueMap | string | 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47 | None | None |
| Values | string | Other, Unknown, PCL, HPGL, PJL, PS, PSPrinter, IPDS, PPDS, EscapeP, Epson, DDIF, Interpress, ISO6429, Line Data, MODCA, REGIS, SCS, SPDL, TEK4014, PDS, IGP, CodeV, DSCDSE, WPS, LN03, CCITT, QUIC, CPAP, DecPPL, Simple Text, NPAP, DOC, imPress, Pinwriter, NPDL, NEC201PL, Automatic, Pages, LIPS, TIFF, Diagnostic, CaPSL, EXCL, LCDS, XES, MIME | None | TRANSLATABLE= true |
| DefaultMimeType | string |
| Description | string | Specifies the default mime type used by the Printer if the DefaultLanguage is set to indicate a mime type is in use (value=47). | None | TRANSLATABLE= true |
| ModelCorrespondence | string | CIM_Printer.DefaultLanguage | None | None |
| DefaultNumberUp | uint32 |
| Description | string | The number of print-stream pages that the Printer will render onto a single media sheet unless a Job specifies otherwise. | None | TRANSLATABLE= true |
| DefaultPaperType | string |
| Description | string | Specifies the paper type that the Printer will use if a PrintJob does not specify a particular type. The string should be expressed in the form specified by ISO/IEC 10175 Document Printing Application (DPA) which is also summarized in Appendix C of RFC 1759 (Printer MIB). | None | TRANSLATABLE= true |
| ModelCorrespondence | string | CIM_Printer.PaperTypesAvailable | None | None |
| DetectedErrorState | uint16 |
| Description | string | Printer error information. | None | TRANSLATABLE= true |
| MappingStrings | string | MIB.IETF|Printer-MIB.hrPrinterDetectedErrorState | None | None |
| ModelCorrespondence | string | CIM_Printer.ErrorInformation | None | None |
| Values | string | Unknown, Other, No Error, Low Paper, No Paper, Low Toner, No Toner, Door Open, Jammed, Offline, Service Requested, Output Bin Full | None | TRANSLATABLE= true |
| HorizontalResolution | uint32 |
| Description | string | Printer's horizontal resolution in Pixels per Inch. | None | TRANSLATABLE= true |
| ModelCorrespondence | string | CIM_PrintJob.HorizontalResolution | None | None |
| Units | string | Pixels per Inch | None | TRANSLATABLE= true |
| JobCountSinceLastReset | uint32 |
| Counter | boolean | true | None | None |
| Description | string | Printer jobs processed since last reset. These jobs may be processed from one or more PrintQueues. | None | TRANSLATABLE= true |
| MarkingTechnology | uint16 |
| Description | string | Specifies the marking technology used by the Printer. | None | TRANSLATABLE= true |
| MappingStrings | string | MIB.IETF|Printer-MIB.prtMarkerMarkTech | None | None |
| ValueMap | string | 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27 | None | None |
| Values | string | Other, Unknown, Electrophotographic LED, Electrophotographic Laser, Electrophotographic Other, Impact Moving Head Dot Matrix 9pin, Impact Moving Head Dot Matrix 24pin, Impact Moving Head Dot Matrix Other, Impact Moving Head Fully Formed, Impact Band, Impact Other, Inkjet Aqueous, Inkjet Solid, Inkjet Other, Pen, Thermal Transfer, Thermal Sensitive, Thermal Diffusion, Thermal Other, Electroerosion, Electrostatic, Photographic Microfiche, Photographic Imagesetter, Photographic Other, Ion Deposition, eBeam, Typesetter | None | TRANSLATABLE= true |
| MaxCopies | uint32 |
| Description | string | The maximum number of copies that can be produced by the Printer from a single Job. | None | TRANSLATABLE= true |
| ModelCorrespondence | string | CIM_PrintJob.Copies | None | None |
| MaxNumberUp | uint32 |
| Description | string | The maximum number of print-stream pages that the Printer can render onto a single media sheet. | None | TRANSLATABLE= true |
| ModelCorrespondence | string | CIM_PrintJob.NumberUp | None | None |
| MaxSizeSupported | uint32 |
| Description | string | Specifies the largest Job (as a byte stream) that the Printer will accept in units of Kbytes. A value of zero indicates that no limit has been set. | None | TRANSLATABLE= true |
| ModelCorrespondence | string | CIM_PrintJob.JobSize | None | None |
| Units | string | KiloBytes | None | TRANSLATABLE= true |
| PrinterStatus | uint16 |
| Description | string | Status information for a Printer, beyond that specified in the LogicalDevice Availability property. Values include "Idle" (3) and an indication that the Device is currently printing (4). | None | TRANSLATABLE= true |
| MappingStrings | string | MIB.IETF|Printer-MIB.hrPrinterStatus | None | None |
| ValueMap | string | 1, 2, 3, 4, 5, 6, 7 | None | None |
| Values | string | Other, Unknown, Idle, Printing, Warmup, Stopped Printing, Offline | None | TRANSLATABLE= true |
| TimeOfLastReset | datetime |
| Description | string | Time of last reset of the Printer Device. | None | TRANSLATABLE= true |
| VerticalResolution | uint32 |
| Description | string | Printer's vertical resolution in Pixels per Inch. | None | TRANSLATABLE= true |
| ModelCorrespondence | string | CIM_PrintJob.HorizontalResolution | None | None |
| Units | string | Pixels per Inch | None | TRANSLATABLE= true |