| Name | Data Type | Qualifiers |
| Name | Data Type | Value | Scope | Flavors |
| AdapterDiagnosticCode | uint32 |
| Description | string | The AdapterDiagnosticCode provides both generic and vendor-specific diagnostic functionality. For all ports, all bits set to zero means the port status is good. Any non-zero value means there are possible error conditions. | None | TRANSLATABLE= true |
| Mappingstrings | string | MAD.IBTA | PortInfo | DiagCode | None | None |
| AdapterStatus | uint32 |
| Description | string | The Adapter Status | None | TRANSLATABLE= true |
| ValueMap | string | 1, 2, 3, 4, 5, 6, 7 | None | None |
| Values | string | Other, Unknown, Port Ready, Performing Self Test, Initializing, Soft Error, Hard Error | None | TRANSLATABLE= true |
| LIDMask | uint8 |
| Description | string | The LID Mask Control value provides a way to have multiple addresses for a single path. The number of LIDs assigned to a port range from 1 to 128 unicast LIDs. | None | TRANSLATABLE= true |
| MaxValue | sint64 | 128 | None | None |
| MinValue | sint64 | 1 | None | None |
| Write | boolean | true | None | None |
| LinkSpeedActive | uint8 |
| BitMap | string | 0 | None | None |
| BitValues | string | 2.5 Gbps | None | TRANSLATABLE= true |
| Description | string | Currently active link speed. It is a component of actual speedActual speed is the linlspeedactive times the linkwidthactive | None | TRANSLATABLE= true |
| Mappingstrings | string | MAD.IBTA | PortInfo | LinkSpeedActive | None | None |
| LinkWidthActive | uint8 |
| BitMap | string | 0, 1, 3 | None | None |
| BitValues | string | 1x, 4x, 12x | None | TRANSLATABLE= true |
| Description | string | Currently active link width. Only one width should be selected. Therefore, the only valid values are 1 (1x), 2 (4x), and 8 (12x). | None | TRANSLATABLE= true |
| Mappingstrings | string | MAD.IBTA | PortInfo | LinkWidthActive | None | None |
| MaxSpeed | uint64 |
| Description | string | The Max speed of the connection is derived from the product ofLinkSpeedEnabled and LinkWidthAvailable. | None | TRANSLATABLE= true |
| Override | string | MaxSpeed | None | OVERRIDABLE= false
|
| Units | string | Bits per Second | None | TRANSLATABLE= true |
| NetworkAddresses | string |
| ArrayType | string | Indexed | None | None |
| Description | string | LIDs assigned to this element can be set in the NetworkAddresses property | None | TRANSLATABLE= true |
| MappingStrings | string | MIF.DMTF|Network Adapter 802 Port|001.3 | None | None |
| MaxLen | uint32 | 64 | None | None |
| Override | string | NetworkAddresses | None | OVERRIDABLE= false
|
| PortNumber | uint8 |
| Description | string | The port number within the container Device | None | TRANSLATABLE= true |
| PortType | uint8 |
| Description | string | The type of port; e.g. switch, router, channel adapter. | None | TRANSLATABLE= true |
| ValueMap | string | 1, 2, 3, 4, 5 | None | None |
| Values | string | Other, Unknown, Switch, Router, Channel Adapter | None | TRANSLATABLE= true |
| Speed | uint64 |
| Description | string | The Speed property is derived from the product of LinkSpeedActive and LinkSpeedActive. This is the actual speed of the connection | None | TRANSLATABLE= true |
| MappingStrings | string | MIB.IETF|RFC1213-MIB.ifSpeed, MIF.DMTF|Network Adapter 802 Port|001.5 | None | None |
| Override | string | Speed | None | OVERRIDABLE= false
|
| Units | string | Bits per Second | None | TRANSLATABLE= true |