| Name | Data Type | Qualifiers |
| Name | Data Type | Value | Scope | Flavors |
| BlockErrors | uint32 |
| Counter | boolean | true | None | None |
| Description | string | Total number of block errors seen by the Device on the last or current call. That a call is in-progress is indicated by the CallStatus property. | None | TRANSLATABLE= true |
| BlocksReceived | uint32 |
| Counter | boolean | true | None | None |
| Description | string | Total number of blocks received by the Device on the last or current call. That a call is in-progress is indicated by the CallStatus property. | None | TRANSLATABLE= true |
| BlocksResent | uint32 |
| Counter | boolean | true | None | None |
| Description | string | Total number of blocks resent by the Device on the last or current call. That a call is in-progress is indicated by the CallStatus property. | None | TRANSLATABLE= true |
| BlocksSent | uint32 |
| Counter | boolean | true | None | None |
| Description | string | Total number of blocks sent by the Device on the last or current call. That a call is in-progress is indicated by the CallStatus property. | None | TRANSLATABLE= true |
| CallLength | datetime |
| Description | string | Length of the last or current call. That a call is in-progress is indicated by the CallStatus property. The 'interval' format of the datetime data type should be used for the property value. | None | TRANSLATABLE= true |
| CallSpeed | uint32 |
| Description | string | The rate at which the receiver and transmitter are or were last cooperating, on a call, before disconnection. | None | TRANSLATABLE= true |
| Units | string | Bits per Second | None | TRANSLATABLE= true |
| CallStatus | uint16 |
| Description | string | Status of the Modem. For example, information regarding modem negotiation or whether the modem is connected (values 8 and 9, respectively) can be conveyed in this property. | None | TRANSLATABLE= true |
| Values | string | Unknown, Other, Offline, On Hook, Dialing, Waiting for Answer, Ringing, Modem Detected, Negotiating, Online, Error | None | TRANSLATABLE= true |
| CharsLost | uint32 |
| Counter | boolean | true | None | None |
| Description | string | Total number of characters lost by the Device on the last or current call. That a call is in-progress is indicated by the CallStatus property. | None | TRANSLATABLE= true |
| CharsReceived | uint32 |
| Counter | boolean | true | None | None |
| Description | string | Total number of characters received by the Device on the last or current call. That a call is in-progress is indicated by the CallStatus property. | None | TRANSLATABLE= true |
| CharsSent | uint32 |
| Counter | boolean | true | None | None |
| Description | string | Total number of characters sent by the Device on the last or current call. That a call is in-progress is indicated by the CallStatus property. | None | TRANSLATABLE= true |
| CompressionInfo | uint16 |
| Description | string | Describes the current data compression characteristics of the Modem. | None | TRANSLATABLE= true |
| ModelCorrespondence | string | CIM_CallBasedModem.CompressionSupported, CIM_CallBasedModem.OtherCompressionInfoDescription | None | None |
| Values | string | Unknown, Other, No Compression, MNP 5, V.42bis, MNP 3, MNP 4, V.58, PEP, HST | None | TRANSLATABLE= true |
| ErrorControlInfo | uint16 |
| Description | string | Describes the current error correction characteristics of the Modem. | None | TRANSLATABLE= true |
| ModelCorrespondence | string | CIM_CallBasedModem.ErrorControlSupported, CIM_CallBasedModem.OtherErrorControlInfoDescription | None | None |
| Values | string | Unknown, Other, No Error Correction, MNP 4, LAPM, V.58, ECP Enhanced Cellular Protocol, ETC Enhanced Throughput Cellular, MNP 1, MNP 2, MNP 3, MNP10, PEP, HST | None | TRANSLATABLE= true |
| FallbackEnabled | boolean |
| Description | string | Indicates whether online fallback is enabled, to be negotiated by the Modem. | None | TRANSLATABLE= true |
| ModulationScheme | uint16 |
| Description | string | Describes the current modulation scheme of the Modem. | None | TRANSLATABLE= true |
| ModelCorrespondence | string | CIM_CallBasedModem.ModulationSupported, CIM_CallBasedModem.OtherSchemeDescription | None | None |
| Values | string | Unknown, Other, Not Supported, Bell 103, Bell 212A, V.22bis, V.32, V.32bis, V.terbo, V.FC, V.34, V.34bis, V.17 (G3 Fax Call), V.21, V.22, V.23 Constant Carrier (1200/75), V.23 Switched Carrier (Half Duplex), V.26bis, V.26ter, V.27ter (G3 Fax Call), V.29 HD (G3 Fax Call), V.34 HD (G3 Fax Call), V.90 Issue 1 (Asymmetric), V.90 Issue 2 (Symmetric), V.58, X2, K56FLEX, V.Fast, PEP, HST | None | TRANSLATABLE= true |
| NumberDialed | string |
| Description | string | Last or current number dialed to which the statistics apply, or NULL if the call was incoming. | None | TRANSLATABLE= true |
| OtherCompressionDescription | string |
| Description | string | Description of the compression type when "Other " (value=1) is defined in the CompressionSupported array. If there are multiple "Other" types, then combine their descriptions into a single string. | None | TRANSLATABLE= true |
| ModelCorrespondence | string | CIM_CallBasedModem.CompressionSupported | None | None |
| OtherCompressionInfoDescription | string |
| Description | string | Description of the current compression type when "Other" (value=1) is specified in the CompressionInfo property. | None | TRANSLATABLE= true |
| ModelCorrespondence | string | CIM_CallBasedModem.CompressionInfo | None | None |
| OtherErrorControlDescription | string |
| Description | string | Description of the error control type when "Other" (value=1) is specified in the ErrorControlSupported property. If there are multiple "Other" types, then combine their descriptions into a single string. | None | TRANSLATABLE= true |
| ModelCorrespondence | string | CIM_CallBasedModem.ErrorControlSupported | None | None |
| OtherErrorControlInfoDescription | string |
| Description | string | Description of the error control when "Other" (value=1) is defined as the value of the ErrorControlInfo property. | None | TRANSLATABLE= true |
| ModelCorrespondence | string | CIM_CallBasedModem.ErrorControlInfo | None | None |
| OtherModulationDescription | string |
| Description | string | Description of the current modulation type when "Other" (value=1) is specified in the ModulationSupported property. If there are multiple "Other" types, then combine their descriptions into a single string. | None | TRANSLATABLE= true |
| ModelCorrespondence | string | CIM_CallBasedModem.ModulationSupported | None | None |
| OtherSchemeDescription | string |
| Description | string | Description of the current modulation type when "Other" (value=1) is specified in the ModulationScheme property. | None | TRANSLATABLE= true |
| ModelCorrespondence | string | CIM_CallBasedModem.ModulationScheme | None | None |
| TimeOfLastReset | datetime |
| Description | string | Time of last reset of the Modem. | None | TRANSLATABLE= true |