Name | Data Type | Qualifiers |
Name | Data Type | Value | Scope | Flavors |
EstimatedChargeRemaining | uint16 |
Description | string | An estimate of the percentage of full charge remaining for a UPS (that uses battery technology). | None | TRANSLATABLE= true |
Gauge | boolean | true | None | None |
MappingStrings | string | MIF.DMTF|UPS Battery|001.4 | None | None |
Units | string | Percent | None | TRANSLATABLE= true |
EstimatedRunTime | uint32 |
Description | string | EstimatedRunTime is an estimate in minutes of the time to battery, generator, ... depletion under the present load conditions if the utility power is off, or lost and remains off. | None | TRANSLATABLE= true |
MappingStrings | string | MIF.DMTF|UPS Battery|001.3 | None | None |
Units | string | Minutes | None | TRANSLATABLE= true |
Range1InputVoltageHigh | uint32 |
Description | string | If the voltage (in millivolts) rises above the value specified by Range1InputVoltageHigh, the UPS will compensate by trimming the voltage. A value of 0 indicates that the voltage at which trimming occurs is 'unknown'. | None | TRANSLATABLE= true |
MappingStrings | string | MIF.DMTF|Power Supply|004 | None | None |
Override | string | Range1InputVoltageHigh | None | OVERRIDABLE= false
|
Units | string | MilliVolts | None | TRANSLATABLE= true |
Range1InputVoltageLow | uint32 |
Description | string | If the voltage (in millivolts) drops below the value specified by Range1InputVoltageLow, the UPS will compensate by boosting the voltage using its power source(s). A value of 0 indicates that the voltage at which boosting occurs is 'unknown'. | None | TRANSLATABLE= true |
MappingStrings | string | MIF.DMTF|Power Supply|004 | None | None |
Override | string | Range1InputVoltageLow | None | OVERRIDABLE= false
|
Units | string | MilliVolts | None | TRANSLATABLE= true |
Range2InputVoltageHigh | uint32 |
Description | string | If the voltage (in millivolts) rises above the value specified by Range2InputVoltageHigh, the UPS will compensate by trimming the voltage. A value of 0 indicates that the voltage at which trimming occurs is 'unknown'. | None | TRANSLATABLE= true |
MappingStrings | string | MIF.DMTF|Power Supply|004 | None | None |
Override | string | Range2InputVoltageHigh | None | OVERRIDABLE= false
|
Units | string | MilliVolts | None | TRANSLATABLE= true |
Range2InputVoltageLow | uint32 |
Description | string | If the voltage (in millivolts) drops below the value specified by Range2InputVoltageLow, the UPS will compensate by boosting the voltage using its power source(s). A value of 0 indicates that the voltage at which boosting occurs is 'unknown'. | None | TRANSLATABLE= true |
MappingStrings | string | MIF.DMTF|Power Supply|004 | None | None |
Override | string | Range2InputVoltageLow | None | OVERRIDABLE= false
|
Units | string | MilliVolts | None | TRANSLATABLE= true |
RemainingCapacityStatus | uint16 |
Description | string | The indication of the capacity remaining in the UPS' batteries, generator, ... A value of "Normal" (2) indicates that the remaining estimated minutes of run-time is greater than the UPS' defined 'low power' state (typically two minutes). A value of "Low" (3) indicates that the remaining estimated minutes of run-time is less than or equal to the UPS' defined 'low power' state. A value of "Depleted" (4) indicates that the UPS will be unable to sustain the present load when and if the utility power is lost (including the possibility that the utility power is currently absent). | None | TRANSLATABLE= true |
MappingStrings | string | MIF.DMTF|UPS Battery|001.1 | None | None |
ValueMap | string | 1, 2, 3, 4 | None | None |
Values | string | Unknown, Normal, Low, Depleted | None | TRANSLATABLE= true |
TimeOnBackup | uint32 |
Description | string | TimeOnBackup indicates the elapsed time in seconds since the UPS last switched to battery power, generator, ... Or, the time since the UPS was last restarted, whichever is less. Zero shall be returned if the UPS is 'on line'. | None | TRANSLATABLE= true |
MappingStrings | string | MIF.DMTF|UPS Battery|001.2 | None | None |
Units | string | Seconds | None | TRANSLATABLE= true |