Name | Data Type | Qualifiers |
Name | Data Type | Value | Scope | Flavors |
AggressiveModeGroupID | uint16 |
Description | string | When IKEAction.ExchangeMode is set to "Aggressive", this property specifies the key exchange groupID to use in a proposal. If the GroupID number is from the vendor-specific range (32768-65535), the VendorID qualifies the group number. Well-known group identifiers from RFC2412 are: 0='Not Applicable', 1='DH768', 2='DH1024', 3='ECC2N155', 4='ECC2N185', and 5='DH1536' | None | TRANSLATABLE= true |
ModelCorrespondence | string | CIM_IKEAction.VendorID | None | None |
ExchangeMode | uint16 |
Description | string | The ExchangeMode designates the mode IKE should use for its key negotiations. | None | TRANSLATABLE= true |
ValueMap | string | 1, 2, 4 | None | None |
Values | string | Base, Main, Aggressive | None | TRANSLATABLE= true |
RefreshThresholdDerivedKeys | uint8 |
Description | string | RefreshThresholdDerivedKeys is the percentage of the derived key limit remaining before the IKE phase 1 SA is renegotiated. The default value (zero) means there is no limit. | None | TRANSLATABLE= true |
UseIKEIdentityType | uint16 |
Description | string | UseIkeIdentityType is used in conjunction with the available IKEIdentity instances for the IPProtocolEndpoint. UseIKEIdentityType designates the type of IKE Identity to use in sending an IKE message. | None | TRANSLATABLE= true |
ModelCorrespondence | string | CIM_IKEIdentity.IdentityType | None | None |
ValueMap | string | 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 | None | None |
Values | string | IPV4_ADDR, FQDN, USER_FQDN, IPV4_ADDR_SUBNET, IPV6_ADDR, IPV6_ADDR_SUBNET, IPV4_ADDR_RANGE, IPV6_ADDR_RANGE, DER_ASN1_DN, DER_ASN1_GN, KEY_ID | None | TRANSLATABLE= true |
VendorID | string |
Description | string | The VendorID property is used to identify vendor-defined key exchange GroupIDs. | None | TRANSLATABLE= true |
ModelCorrespondence | string | CIM_IKEAction.AggressiveModeGroupID | None | None |