| Name | Data Type | Qualifiers |
| Name | Data Type | Value | Scope | Flavors |
| AdminStatus | uint16 |
| Description | string | This defines the desired state of the BGP connection. | None | TRANSLATABLE= true |
| Mappingstrings | string | MIB.IETF|RFC1657-MIB.bgpPeerAdminStatus | None | None |
| ValueMap | string | 1, 2 | None | None |
| Values | string | Stop, Start | None | TRANSLATABLE= true |
| HoldTime | uint16 |
| Description | string | This defines the maximum amount of time in seconds that may elapse between the receipt of successive KEEPALIVE or UPDATE messages. This is instrumented as a counter that increments from zero to the value specified in this property. The value of this property is calculated by this BGP speaker by using the smaller of the values of bgpPeerHoldTimeConfigured and the Hold Time received in the OPEN message. This value, if not zero seconds, must be at least three seconds, up to a maximum of 65535 seconds. Receipt of either a KEEPALIVE or an UPDATE message resets this value. | None | TRANSLATABLE= true |
| Mappingstrings | string | MIB.IETF|RFC1657-MIB.bgpPeerHoldTime | None | None |
| Units | string | Seconds | None | TRANSLATABLE= true |
| IsEBGP | boolean |
| Description | string | A boolean that, when TRUE, signifies that this is an instance of the external version of BGP (FALSE is the internal version). | None | TRANSLATABLE= true |
| IsEBGPMultihop | boolean |
| Description | string | Normally, two routers running EBGP must be physically connected. This boolean, when TRUE, denotes a LOGICAL connection between two routers that are running EBGP (e.g., there is an intermediate router or interface between them. | None | TRANSLATABLE= true |
| KeepAlive | uint16 |
| Description | string | This defines the time interval in seconds for the KeepAlive timer established with the peer. The value of this property is calculated by this speaker such that, when compared with the HoldTime property, it has the same proportion as the KeepAliveConfigured property has with the HoldTimeConfigured property. A value of 0 indicates that the KeepAlive timer has not yet been established. The maximum value of this property is 21845 seconds. | None | TRANSLATABLE= true |
| Mappingstrings | string | MIB.IETF|RFC1657-MIB.bgpPeerKeepAlive | None | None |
| Units | string | Seconds | None | TRANSLATABLE= true |
| LocalAddress | string |
| Description | string | This is the local IP address of this router's BGP connection. | None | TRANSLATABLE= true |
| Mappingstrings | string | MIB.IETF|RFC1657-MIB.bgpPeerLocalAddr | None | None |
| LocalIdentifier | string |
| Description | string | This is the unique identifier of the local BGP router. This is often the router ID (e.g., an IP address). | None | TRANSLATABLE= true |
| Mappingstrings | string | MIB.IETF|RFC1657-MIB.bgpIdentifier | None | None |
| LocalPort | uint16 |
| Description | string | This is the local port number for the TCP connection of this router's BGP connection. | None | TRANSLATABLE= true |
| Mappingstrings | string | MIB.IETF|RFC1657-MIB.bgpPeerLocalPort | None | None |
| NegotiatedVersion | string |
| Description | string | This defines the negotiated version of BGP that is running between the two peers. | None | TRANSLATABLE= true |
| Mappingstrings | string | MIB.IETF|RFC1657- MIB.bgpPeerNegotiatedVersion | None | None |
| PeerIdentifier | string |
| Description | string | This is the unique identifier of the peer BGP router. This is often the router ID (e.g., an IP address). | None | TRANSLATABLE= true |
| Mappingstrings | string | MIB.IETF|RFC1657-MIB.bgpPeerIdentifier | None | None |
| RemoteAddress | string |
| Description | string | This is the remote IP address of this router's BGP connection. | None | TRANSLATABLE= true |
| Mappingstrings | string | MIB.IETF|RFC1657-MIB.bgpPeerRemoteAddr | None | None |
| RemoteAS | uint16 |
| Description | string | This is the remote AS number for this router's BGP connection. | None | TRANSLATABLE= true |
| Mappingstrings | string | MIB.IETF|RFC1657-MIB.bgpPeerRemoteAs | None | None |
| RemotePort | uint16 |
| Description | string | This is the remote port number for the TCP connection of this router's BGP connection. | None | TRANSLATABLE= true |
| Mappingstrings | string | MIB.IETF|RFC1657-MIB.bgpPeerRemotePort | None | None |
| State | uint16 |
| Description | string | This defines the current connection state of the BGP Peer. | None | TRANSLATABLE= true |
| Mappingstrings | string | MIB.IETF|RFC1657-MIB.bgpPeerState | None | None |
| ValueMap | string | 1, 2, 3, 4, 5, 6 | None | None |
| Values | string | Idle, Connect, Active, OpenSet, OpenConfirm, Established | None | TRANSLATABLE= true |