Name | Data Type | Qualifiers |
Name | Data Type | Value | Scope | Flavors |
LineAttenuation | uint32 |
Description | string | Measured difference in the total power transmitted by the peer Modem and the total power received by this Modem. This is measured in tenths of dB. | None | TRANSLATABLE= true |
Gauge | boolean | true | None | None |
Units | string | Tenths of Decibels | None | TRANSLATABLE= true |
LineState | uint32 |
Description | string | Status indicates the current state of the connection (line). The property holds a bitmap describing the possible conditions. For example, 1) No Defect - There no defects on the line; 2) Loss Of Framing - ATUR failure due to not receiving valid frame; 4) Loss Of Signal - ATUR failure due to not receiving signal; 8) Loss Of Power - ATUR failure due to loss of power; 32) Loss Of Signal Quality - Loss of Signal Quality is declared when the NoiseMargin falls below the minimum NoiseMargin, or the bit-error-rate exceeds 10^-7. | None | TRANSLATABLE= true |
ValueMap | string | 1, 2, 4, 8, 32 | None | None |
Values | string | No Defect, Loss Of Framing, Loss Of Signal, Loss Of Power, Loss Of Signal Quality | None | TRANSLATABLE= true |
MaxDataRate | uint32 |
Description | string | Indicates the maximum currently attainable data rate for the Modem. This value will be equal or greater than the current line rate. | None | TRANSLATABLE= true |
Units | string | Bits per Second | None | TRANSLATABLE= true |
NoiseMargin | uint32 |
Description | string | Noise Margin of this Modem with respect to its received signal, in tenths of dB. | None | TRANSLATABLE= true |
Units | string | Tenths of Decibels | None | TRANSLATABLE= true |
TotalOutputPower | uint32 |
Description | string | Measured total output power (in tenths of dB) transmitted by this Modem. | None | TRANSLATABLE= true |
Gauge | boolean | true | None | None |
Units | string | Tenths of Decibels | None | TRANSLATABLE= true |